Off white wedding gown high neckline that has a embroidered pattern, Matching fabric at the top of the yoke with a heavily beaded square panel below. There is a 4" organza floral embroidered strip that goes around all three sides of the yoke that is not attached and extends to the back waistline. The panel has a beaded edge on both sides. There is 1" beaded fringe that hangs from the bottom at the front. The rest of the top is plain organza with a net overlay having embroidered details of dots and a vine design in the middle. A 3 1/4" wide satin fabric is slightly bunched at the waist and sewn to the dress every 3 1/4". A wide flat bow is in the front. The skirt is satin with a net overlay that is heavily embroidered down the middle and then extending to the sides. Bottom is an additional pattern with a scalloped hem on the netting. Sleeves are gathered on the satin underlay, but not on the netting that is embroidered. 3/4 length sleeve has a satin pleated edge.
Back 11 hook and eyes close the back.
There is reference to a man's shirt. It is unclear which of these two it is. Both are temporarily being stored with the dress.
B. Wedding shirt, man's. Very low collar with a horizontal buttonhole on each side of the front. front and back with the sides coming up. The left side front opening is wider than the placket at the bottom. Cuffs turn up and have cuff link buttonholes.
C. Wedding shirt, man's. Very low collar with a large U shaped panel in the front of an additional fabric. There is a horizontal buttonhole at the top and two vertical buttonholes, 4 and 8.5" down the panel. Back is lower than the front at the hemline. Opening in the back has a loop sewn vertically that is 1 1/2" long below the right neckline. There is one button sewn about 18" from the top and no evidence of any others.
Dimensions
Width
15 in
Length
52-1/2 in
Dimension Notes
B. Shirt: 17.5 W x 31.5" L
C. Shirt: 16.5 W x 29" L
