The three-part mahogany dining table has an eight-legged rectangular center section with deep rectangular hinged leaves supported by two swing legs on each side. The frame of each elliptic end section is made of laminated pine with mahogany veneer. Each end section has a deep rectangular hinged leaf that is supported by two swing legs with maple rails. The legs are turned and reeded with swelled turnings near the bottom and casters. Cross banding runs along the bottom of the table frames and across the leg stiles.
Dining Table; in three parts, with round reeded legs, elliptical ends, cross banded apron with spandrel blocks at each leg on cup casters. When fully extended this table has twenty legs and seats 16 to 18 guests. Carved and inlaid mahogany with pine, tulip poplar, and rosewood banding.
Category
Furniture
Acquisition
Accession
F 76.15
Source or Donor
Israel Sack, Inc.
Acquisition Method
Purchase
Credit Line
Purchase, 1976
Made/Created
Artist
Unknown
Date made
1805 - 1815
Place
State/Province
New York
Country
America
Continent
North America
Dimensions
Dimension Description
Center open
Height
29 in
Width
53-1/2 in
Depth
24-1/2 in
Dimension Description
Center closed
Height
29 in
Width
71-3/4 in
Depth
24-1/2 in
Materials
Material
Mahogany, White pine, Maple, Rosewood, Gilt brass
Material Notes
Mahogany, white pine, maple, rosewood banding, gilt brass cup casters.
Condition
Notes
The bottom edges of all the rails have been decoratively undercut at a later time to create the present vertically grained, bracket-like transitions abutting the leg stiles. The banded inlay across the leg stiles may have been introduced at this time.
Provenance
Notes
Purchased from Israel Sack, Inc., New York, NY 9/16/76, who attributed the table to Duncan Phyfe. $18,500