Name/Title
Wrench, Open-endEntry/Object ID
2008-025-001Description
Open-End, Structural Wrench
A wrench has an open-end on one attached to a round handle, which tapers to a point on the other end. The open-end section of the wrench has a rounded on the outside, and has three straight edges on the inside (The shape is similar to a "C".). The handle is slightly curved where it connects to the flat open-end section of the wrench head. The handle is curved and tapers into a point. On the handle, just before it tapers, there is a raised section of metal in the shape of a half-circle, raised approximately 0.4 cm. The handle starts to taper, approximately 11 cm from the pointed end.
Note: The metal is probably cast iron or steel because of the corrosive properties.Made/Created
Notes
Location of Obj ID #: Open-end of wrench on flat section that rest on the groundDimensions
Height
3.4 cmWidth
7.9 cmDepth
1.6 cmLength
49.9 cmCircumference
7.4 cmDimension Notes
If the following details are confusing, look at sketch scanned and attached to Multimedia Links.
Height is from the ground to the top of the handle which is raised.
Length is from the tip of the wrench head to the tip of the pointed handle.
Width is the measurement across the widest point of the open-end head of the wrench.
Depth is the thickness of the metal of the head of the wrench.
Circumference is the distance around the handle, close to where the handle bends and attaches to the open end section of the wrench.