Name/Title
PlaneDescription
Handle has design on it and is of good size, on top is two thin and slender cutting blades and two adjustment on these. It also has a round wooden handle at the frone. On the bottom it has a flat bar that has a groove in it. To the side of this is a bar with 8 holes and there is also an adjustment screw on this.
Marks: "No> 47,S, STANLEY"
REmarks: By adjusting the bar on the bottom, you could cut the "timg" pr the "groove". Unusual because it usually took two planes to do this job.
Special Function: Mr. Bogeman was born July 30, 1895 and started smithing at age 16 as an apprentice for John Miller. Mr. Bogeman died Jan. 22, 1988.Use
Used by Leonard V. BogemanCollection
Leonard V. BogemanAcquisition
Accession
1984.048Source or Donor
Leonard V. BogemanAcquisition Method
DonationCreate Date
July 1, 1984Update Date
April 14, 2004