Name/Title
The Arpege Technical StoryEntry/Object ID
2004.06.07.05.01Scope and Content
4 Pages- stapled
has a double 2004.06.07.05.02
New method eliminates the need for a mold and expensive tools, by creating a composite hull-- a thin inner shell of mahogany veneer, shaped over converntional boat forms and coved with Fiberglas cloth and polyester resin. Developed by Jean Filloux, 30 year old Freanch engineer/ explorer, and George Hoffman, military architect. Jean Filloux speaks of why fiberglas is better then wood-- stronger then steel, light, durable, and non-corroding, wont rot or warp, and can be molded in a single piece -- no caulking needed.
stages for building the Arpege:
The hull was built kneel up
form sets, light battens of poplar, willow or other "junk" lumber were nailed to them to create the contours of the hull. Sheets of vinyl film were stretched over the battens and stapled in place to prevent the veneer laminate from adhering to the battens and forms. 4 layers of fiberglas (bonded together with Casconphen Glue and stapled). about 19 layers of fabric were used. after last layer hardened the hull was sanded and coated with resin(colored).
cabin floor, deck, sides, top, all made of wood.Collection
Arpege CollectionArchive Details
Date(s) of Creation
1950 - 1958Archive Notes
Date(s) Created: January 12, 1956
Date(s): 1956Condition
Overall Condition
ExcellentDate Examined
Nov 6, 2006Examined By
Keira GruberNotes
nothing seems wrong
rust?? by the staple