Name/Title
Taber Abrasor parts + accessoriesEntry/Object ID
1993.05.56.45Description
2 metal parts to the tabor abraser, both contained in a styrofoam pouch. The smaller one is: 3.5cm by 2.5cm with a height of 2cm, all measured with the bolt hole on top. There is a hole made to fit a bolt with a 1cm diameter on one side, there is also a .5cm groove running through the block, as if it was supposed to slip onto something and be bolted down. The number 500 is carved on the side.
The larger one has the same bolt- hole and groove, but the measurements, with the hole facing up, are 5cm by 2.5cm with a height of 2cm. The #500 is also carved on the side of the larger block.Collection
Textile IndustryCataloged By
Whit, ElizabethLexicon
Search Terms
Taber Abraser, Textile Industry, Tabor AbrasorLegacy Lexicon
Object Name
Taber Abrasor parts + accessoriesLocation
Location
Container
Box 1Shelf
Shelf 28Room
Collections RoomBuilding
M.V.T.M.Category
PermanentDate
November 7, 2023Location
Container
Box 2Shelf
Shelf 2, Shelf 2Room
Collections RoomBuilding
M.V.T.M.Category
PermanentMoved By
Whit, ElizabethDate
August 19, 2017General Notes
Note
Status: OK
Status By: Cotter, Ellen
Status Date: 2022-02-09Created By
admin@catalogit.appCreate Date
June 23, 2016Updated By
admin@catalogit.appUpdate Date
November 11, 2023
