Shimizu Denshi SS-105S, SS-105D

Object/Artifact

Radio Alpha

Shimizu Denshi SS-105S, SS-105D
Image: radioworld.co.uk

Overview

Description

10(100) Watt HF Transceiver

Made/Created

Manufacturer

Shimizu Denshi

Date made

1980

Dimensions

Height

4-7/8 in

Width

7 in

Depth

10-11/16 in

Weight

11 lb

General Notes

Note

The Shimizu Denshi (Shimizu Industry Co.) SS-105 is a rare, highly regarded vintage HF transceiver manufactured in Japan and sold primarily as a "semi-kit" in the early 1980s (circa 1980–1984). It is well known among collectors for its distinct, military-style utilitarian look, compact size, and exceptional analog receiver performance. It came in two main power variants: SS-105S: 10 watts.  SS-105D: 100 watts. Features – Design: Modular internal construction where each functional block (AF, IF, VFO, Local Oscillator, PA, Low Pass Filter) is built on its own board for easy servicing, tuning, and modification. – Conversion Scheme: Single-conversion superheterodyne receiver utilizing a pre-mixed scheme with a balanced mixer and a 9.0 MHz Intermediate Frequency (IF). – Tuning & Preselector: Utilizes varactor (variable capacitance) diode double-tuned circuits in the RF stage for front-end selectivity. Specifications – Frequency Coverage: 80 to 10 meters across 10 switchable band segments: 80m: 3.5 – 4.0 MHz 40m: 7.0 – 7.5 MHz  20m: 14.0 – 15.0 MHz (split into two 500 kHz bands)  15m: 21.0 – 23.5 MHz 10m: 28.0 – 30.0 MHz – Operating Modes: SSB (LSB/USB), CW (Standard); FM supported via optional internal transmit/receive modules. – Antenna Impedance: 50 Ohms (SO-239 connector). – Receiver Architecture: Single-conversion superheterodyne (IF = 9.0 MHz). – Sensitivity: SSB: 0.25 µV for 10 dB S/N. FM (optional unit): 0.5 µV for 20 dB QS. – Image Rejection: Greater than 50 dB. – Audio Output Power: 1.5 Watts into 8 Ohms. – RIT (Receiver Incremental Tuning): ±2 kHz range. – RF Output Power: SS-105S: 10 Watts SSB/CW. SS-105D: 100 Watts SSB/CW. – Modulation: Balanced modulator for SSB; direct reactance modulation for optional FM. – Carrier & Unwanted Sideband Suppression: Better than 40 dB down. – Microphone Input Impedance: 500 Ohms to 50 kOhms (4-pin metal locking connector). Factory Options & Accessories 500 Hz narrow CW crystal filter. 25 kHz crystal marker unit for dial calibration. Noise Blanker / RF AGC module. FM transmit/receive optional board set. Power Requirements: 13.8 VDC nominal. Current Drain (SS-105S): ~450 mA (Receive), Max 3 A (Transmit at 10W). Current Drain (SS-105D): ~16 A (Transmit at 100W).