Name/Title
Projector CaseEntry/Object ID
2000.011.001 a-eDescription
A) Dark brown case with metal capped corners. Flip latch on front face near the top. Top folds up and front edge folds down to gain access to the projector. There are two interior storage compartments. The exterior has four stickers and the remains of a fifth. These are steamship/travel stickers. There is a leather bound handle on the top for carrying the case.
B) Wood block for the inside of projector case. Used for shipping purposes to hold projector stable. Sticker on top surface describing use.
C) Bolt--used with wood block.
D) Washer-used with wood block.
E) Wing nut--used with wood block. The wood block slides onto a screw mounted inside the projector case, holding the projector in place. The nut, washer and wing nut are then screwed on top and tightened to keep projector snug in the case during transportation.Acquisition
Notes
Accession Date: 03-Feb-00
Mode of Acquisition: giftLexicon
Nomenclature 4.0
Nomenclature Primary Object Term
CaseNomenclature Class
ContainersNomenclature Category
Category 07: Distribution & Transportation ObjectsLegacy Lexicon
Object Name
projector caseCreated By
Greenlee, LucyCreate Date
March 28, 2001Updated By
Michael GoodchildUpdate Date
May 22, 2026