Name/Title
The Clauss Shear CompanyEntry/Object ID
2026.8.2Description
These two pages from The Clauss Shear Company 1934 Catalogue talk about the different manufacturing processes for shears, scissors, and snips:
"SOLID STEEL SHEARS: The shears, scissors, and snips shown on the preceding pages are of the type known as "solid steel". They are forged from as high as grade of steel as can be used for forging in one piece. They were originally produced to fill a demand for general use in the home or factory, and, while they cutting edge is not as fine in quality as that on our "Steel Laid" line, this type of shear will give years of satisfactory service as an all-purpose tool for general utility."
"STEEL LAID SHEARS: High Carbon Crucible Steel [image]; Bar of Steel for Forging Frame [image]; Forged Frame, Ready to Trim [image]; High Carbon Crucible Steel, Ready to Weld on Frame [image]; High Carbon Crucible Steel Welded on Frame [image]; Blade Hardened, Tempered and Ground, Ready for Polishing [image]; Blade Polished and Plated, Ready for Assembling and Finishing [image].
"Stages of Manufacture: As shown in the above illustration, "Steel Laid" Shears and Snips are made by welding a blade of extra fine quality and hardness to a "frame" of forged steel. This method of manufacture permits the use of a blade with a higher carbon content than can be used in forging. It is this high carbon content which gives these shears their durable, fine cutting edges. These shears are recommended for use where it is necessary to cut fine fabrics continuously over a long period of time. It is our "Professional" and will give long service with very little sharpening."Publication Details
Publication Type
CatalogueAuthor
The Clauss Shear CompanyDate Published
1934Created By
studygroup@scissornet.orgCreate Date
February 26, 2026Updated By
studygroup@scissornet.orgUpdate Date
February 26, 2026
